Titanium
All grades of Titanium listed above are considered commercially pure by industry standards. Titanium content will vary from approximately 99.5% for grade 1 to 99% for grade 4. Applications include airframe components, cryogenic vessels, heat exchangers, components for CPI equipment, condenser tubing and pickling baskets.
| (Annealed Material) | Grade1 | Grade2 | Grade 3 | Grade4 | ||||
| Ultimate Tensile Strength (PSI) |
50,000 | 70,000 | 75,000 | 95,000 | ||||
| Yield Strength (PSI) | 30,000 | 50,000 | 65,000I | 85,000 | ||||
| Elongation | 35% | 30% | 25% | 20% | ||||
| Modulus of Elasticity (All x 10e6 PSI) |
14.9 | 14.9 | 15.1 | 15.2 | ||||
| Poisson’s Ratio | .34 | .34 | .34 | .34 |
| Density | 0.163 lbs/cu in | |
| Melting Point | 1660 °C | |
| Electrical Resistivity @ RT | 56 Microhm-cm | |
| Thermal Conductivity @ RT | 16.0 W/m*k | |
| Thermal Expansion Coefficient: | ||
| (0 to 100 °C) | 8.6 x 10e-6/ °C | |
| (100 to 315 °C) | 9.2 x 10e-6/ °C |
H. Cross Company can supply these products in all forms including wire, ribbon, strip, sheet and foil. See our Typical Dimensions and Tolerances page for further information. If you do not see your required size list Contact Us by email or phone for further information or assistance.