Hastelloy B-2
Hastelloy® is a registered trademark of Haynes International.
| C | 0.01% | ||
| Co | 1%Max | ||
| Cr | 1% | ||
| Fe | 2% Max | ||
| Mn | 1% Max | ||
| Mo | 28% | ||
| Ni | 69% | ||
| Si | 0.1% Max |
Hastelloy B-2 is a nickel-based alloy with excellent corrosion resistance to hydrochloric, sulfuric, acetic and phosphoric acids. It also withstands attack by hydrogen chloride and has excellent resistance to pitting, stress corrosion cracking, knife-line and heat affecting zone attacks. It is not recommended for use in the presence of ferric or cupric salts as they may cause rapid corrosion failure of components. Is commonly used in chemical processing equipment such as pumps, heat exchangers, valves, etc.
| Density | 9.22 g/cc | |
| Melting Point | 1370° C |
| Ultimate Tensile Strength | 133,000 PSI | |
| Yield Strength | 57,400 PSI | |
| Elongation @ Break | 55% | |
| Modulus of Elasticity | 31,500 KSI | |
| Electrical Resistivity | 13.7 Microhm/cm |
H. Cross Company can provide Hastelloy B or B2 in wire, ribbon, strip, sheet and foil sizes to suit your particular needs. Please refer to our Typical Dimension and Tolerances page for general size ranges of products. If you do not see your required size list Contact Us by email or phone for further information or assistance.