Titanium

---

Table of Contents
 

Introduction
Typical Mechanical Properties
Typical Physical Properties
Forms
 

---

Introduction

All grades of Titanium listed above are considered commercially pure by industry standards. Titanium content will vary from approximately 99.5% for grade 1 to 99% for grade 4. Applications include airframe components, cryogenic vessels, heat exchangers, components for CPI equipment, condenser tubing and pickling baskets.

Typical Mechanical Properties

(Annealed Material)		Grade1		Grade2		Grade 3		Grade4
Ultimate Tensile Strength (PSI)		50,000		70,000		75,000		95,000
Yield Strength (PSI)		30,000		50,000		65,000I		85,000
Elongation		35%		30%		25%		20%
Modulus of Elasticity (All x 10e6 PSI)		14.9		14.9		15.1		15.2
Poisson's Ratio		.34		.34		.34		.34

Back to Top

Typical Physical Properties

Density		0.163 lbs/cu in
Melting Point		1660 °C
Electrical Resistivity @ RT		56 Microhm-cm
Thermal Conductivity @ RT		16.0 W/m*k
Thermal Expansion Coefficient:
(0 to 100 °C)		8.6 x 10e-6/ °C
(100 to 315 °C)		9.2 x 10e-6/ °C

Forms

H Cross Company can supply these products in all forms including wire, ribbon, strip, sheet and foil. See our Standard Dimensions and Tolerances page for further information. If you do not see the size range you require email or phone us for more information.

 
Back to Top

Copyright © 2008 H. Cross Company  All rights reserved.

---

Custom Metal Fabrication Shops Services * Specialty Metals Metal Products Fabricators * Refractory Materials Material Metals * Metals Fabricators Machining Precious Metal Alloy Alloys * Precision Cutting Finishing Specialty Metal * Lamp Seal Custom Foil Seals * Precision Metal Processing Rolling * Hardness Rockwell Testing Metal Tensile * Annealing Aluminum Metal Copper Aluminum * Metal Strips Supplier * Open Weave Metallic Ribbons * Precision Metal Products Works * Roll Thin Metal Foils * Precision Sheet Metal Fabrication