Phosphor Bronze CDA510

---

Table of Contents
 

Introduction
Typical Mechanical Properties
Typical Physical Properties
Forms
 

---

Introduction

Phosphor bronze CDA510 is a copper based material primarily used as spring material with good strength, formability and corrosion resistance. It is suitable for contact springs and diaphragms.

Typical Mechanical Properties

		Annealed		As Rolled
Ultimate Tensile Strength		50,000 PSI		110,000 PSI
Yield Strength		20,000 PSI		105,000 PSI
Elongation		45%		2%
Modulus of Elasticity		16 x 10e6 PSI
Poisson's Ratio		0.33

Back to Top

Typical Physical Properties

Density		0.320 lbs/cu in
Melting Point		950° C
Electrical Resistivity @ RT		11.5 Microhm-cm
Thermal Conductivity @ RT		69.2 W/m*k
Thermal Expansion Coefficient (20 to 300° C)		17.8 x 10e-6/°C

Forms

H Cross Company can supply these products in all forms including wire, ribbon, strip, sheet and foil. See our Standard Dimensions and Tolerances page for further information. If you do not see the size range you require email or phone us for more information.

 
Back to Top

Copyright © 2008 H. Cross Company  All rights reserved.

---

Custom Metal Fabrication Shops Services * Specialty Metals Metal Products Fabricators * Refractory Materials Material Metals * Metals Fabricators Machining Precious Metal Alloy Alloys * Precision Cutting Finishing Specialty Metal * Lamp Seal Custom Foil Seals * Precision Metal Processing Rolling * Hardness Rockwell Testing Metal Tensile * Annealing Aluminum Metal Copper Aluminum * Metal Strips Supplier * Open Weave Metallic Ribbons * Precision Metal Products Works * Roll Thin Metal Foils * Precision Sheet Metal Fabrication