PROCESSING CAPABILITIES

---

Table of Contents

Rolling
Drawing
Heat Treating
Cut Pieces
Slitting
Annealing
Electropolishing
Re-Drawing
Re-rolling
Toll-rolling
Slitting

H Cross Company can perform a wide range of processing tasks on all types of materials including the following:
 

Rolling

We can process materials down to .0003" thickness and tolerances of .000025" when necessary.
Surface finishes down to 2 micro-inch are possible with our special polished rolling equipment.
(See Specific material for standard size ranges and tolerances of products)

Rhenium Rolling

Drawing:

Wire drawing from .125" down to .002"

(See specific material for standard size ranges and tolerances of products)

Back to Top

Heat Treating:

We can provide finished product in all tempers from dead soft annealed to spring temper.
(Call or email for more specific information)

Cut Pieces

We can provide ribbon, strips and wire custom cut to length from .050" to 48" long with minimal or no burrs with excellent flatness.
(Call or email for more specific information)

Back to Top

Slitting:

We can slit materials as narrow as .020" depending on the thickness and widths up to 6".
(See specific material for standard size ranges and tolerances of products)
 

Annealing:

We can strand anneal products in our hydrogen or argon atmosphere furnaces to temperatures of 1200 C. We also have a 1650 C high temperature hydrogen atmosphere furnace and a 2300 C hydrogen atmosphere sintering furnace for specialized applications.

2400 C Sintering Furnace

1650 C Furnace

Back to Top

Electropolishing:

We can electro-polish your materials to improve surface finish for critical applications.

Re-Drawing:

H Cross Co. can redraw existing wire diameters to smaller and tighter tolerance diameters on one of our draw benches.

Re-rolling:

We can re-roll most products up to 3" wide if you have obsolete inventory due to product/design changes. We are capable of rolling most materials down to .001" or lower. Why waste material when we may be able to remanufacture it to fit your newer requirements.

Toll-rolling:

We can fabricate customer-supplied materials to suit R & D projects, specialized customer requirements or anything else you cannot perform in house.

Slitting:

We can slit product as narrow as .020" up to 6" wide depending on material.

 
Back to Top

Copyright © 2008 H. Cross Company  All rights reserved.

---

Custom Metal Fabrication Shops Services * Specialty Metals Metal Products Fabricators * Refractory Materials Material Metals * Metals Fabricators Machining Precious Metal Alloy Alloys * Precision Cutting Finishing Specialty Metal * Lamp Seal Custom Foil Seals * Precision Metal Processing Rolling * Hardness Rockwell Testing Metal Tensile * Annealing Aluminum Metal Copper Aluminum * Metal Strips Supplier * Open Weave Metallic Ribbons * Precision Metal Products Works * Roll Thin Metal Foils * Precision Sheet Metal Fabrication